tunnel:If

A tunnel interface.

Telemetry Sensor Path(s)

Configurable Properties
PROPERTY NAME DATA TYPE DESCRIPTION PERMITTED VALUES
descr naming:Descr1024
(string:Basic)
Tunnel Description
MAX SIZE: 254
name naming:Name256
(string:Basic)
The name of the object.
MAX SIZE: 127
DEFAULT: bgp-PeerAf

Operational Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
delInProg scalar:Bool
Deletion in Progress SELECTION: true or false
iod scalar:Uint32
Specifies the IOD. RANGE: [0, 4294967295]
operSt tunnel:OperSt
(scalar:Enum8)
The runtime state of the routed VLAN interface. SELECTION:
1 - up
2 - down
DEFAULT: down
operStQual tunnel:OperStQual
(scalar:Enum8)
The chassis operational status qualifier. SELECTION:
0 - unknown
1 - none
2 - initing
3 - incomp-conf
4 - dup-conf
5 - no-encap
6 - admin-down
7 - src-down
8 - src-unres
9 - no-dest
10 - desip-unres
11 - dest-unreach
12 - vrf-mismatch
13 - vrf-fwdref
14 - vrf-down
15 - mtu-error
16 - hwprog-fail
DEFAULT: unknown

Internal Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
adminSt tunnel:AdminSt
(scalar:Enum8)
The administrative state of the interface. SELECTION:
1 - up
2 - down
DEFAULT: up
cfgdMtu tunnel:ConfMtu
(scalar:Uint32)
The routed VLAN interface configured maximum transmission unit (MTU).
RANGE: [1 , 9000]
DEFAULT: 9000
dest address:Ip
The transmission destination identifier. Value must match ipv4 or ipv6 known format
id nw:IfId
(base:IfIndex)
An identifier . Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100
keepAlvIntvl tunnel:KeepAlvIntvl
(scalar:Uint32)
The interval time between sending keepalive messages.
RANGE: [0 , 32767]
DEFAULT: 10
keepAlvRetries tunnel:KeepAlvRetries
(scalar:Uint32)
The configured interval before sending another series of keep alive messages.
RANGE: [1 , 255]
DEFAULT: 3
mac address:MAC
The MAC address. Value must match MM:MM:MM:SS:SS:SS format
modTs mo:TStamp
(scalar:Date)
The time when this object was last modified. SELECTION:
0 - never
DEFAULT: never
src address:Ip
The source node IP address. Value must match ipv4 or ipv6 known format
status mo:ModificationStatus
(scalar:Bitmask32)
Modification status SELECTION:
2 - created
4 - modified
8 - deleted
16 - replaced
tLayer tunnel:LayerT
(scalar:Enum8)
The layer for the tunnel interface. SELECTION:
1 - l2
2 - l3
DEFAULT: l2
tType tunnel:TunnelQual
(scalar:Enum8)
The type of target. SELECTION:
0 - unknown
1 - ivxlan
2 - vxlan
DEFAULT: ivxlan
type tunnel:EpT
(scalar:Bitmask8)
The specific type of the routed vlan interface. SELECTION:
1 - physical
2 - virtual
4 - proxy-acast-v4
8 - proxy-acast-v6
16 - proxy-acast-mac
32 - multdst-repl
DEFAULT: physical
vrfName l3:VrfName
(string:Basic)
The interface VRF name. This name can be up to 64 alphanumeric characters. A sequence of characters